NOW TOUCH AND TEST ANY CIRCUIT TEST POINT AND MAKE AUTORANGED ERROR FREE MEASUREMENTS IN A FRACTION OF THE TIME!

• A complete waveform and circuit analyzing system in one instrument
• Integrated measurements of all circuit parameters provides fast troubleshooting answers
• Exclusive autoranged timebase and vertical attenuators eliminate wasted time
• All functions microprocessor integrated for ease-of-use
• Auto-Tracking™ digital readout of waveform voltage and frequency with one probe connection
• Full performance, 100 MHz dual trace oscilloscope
• Digital delta measurements to analyze every portion of any waveform

Specifications:
Vertical Amplifiers - DISPLAY MODES: Channel A, inverted channel A (-A), channel B, dual trace (A&B), algebraic sum (A+B) or difference (B-A), vector (X-Y).
CALIBRATION ACCURACY: ±3% at 1 kHz.
FREQUENCY RESPONSE (100 MHz): AC coupled: ±3 dB of 1 kHz level from 10 Hz to 100 MHz, usable to 150 MHz.
SENSITIVITY: 20 mV/div. to 200 V/div. with supplied 39G292 10X probe; 2 mV/div. to 20 V/div. with (optional) DP270 Direct Probe.
MAXIMUM INPUT PROTECTION: Supplied 39G292 10X Probe: 2500 volts breakdown (DC + Peak AC).

Horizontal Sweep - SWEEP RATES: 100 milliseconds/division to 20 nanosecond/division. Autorange automatically selects sweep rate to show approximately 2-5 cycles of waveform.
ACCURACY: ±3%.

Trigger Circuits - TRIGGER SOURCE: CH A, CH B, AC power line, or external. TRIGGER MODES: NORM, AUTO, TV.
Auto-TrackingTM Digital Tests - DC Volts:
DCV FUNCTION: Provides direct reading of DC voltage on selected channel. ACCURACY: ±0.5% ±2 digits.

Peak-to-Peak Volts - VPP FUNCTION: Provides direct reading of peak-to-peak voltage on selected channel with either X10 or direct probes.
ACCURACY: ±2% ±4 counts.
FREQUENCY RESPONSE: ±0.5 dB from 20 Hz to 30 MHz,²-3 dB at 100 MHz.

AC Volts - ACV FUNCTION: Calculates RMS sinewave value from PPV measurement. dBm FUNCTION: Calculates dBm measurement from PPV sinewave measurement, referencing 1 mW across 600 Ohms (0 dBm =.7746 volts RMS).

Frequency - Automatically displays the frequency of the signal on selected channel. RANGES: 10.00 Hz to 150 MHz.
ACCURACY: .001% ±1 digit.

Delta Peak-to-Peak - Measures amplitude of intensified area on selected channel.

Delta Time - Measures time of intensified waveform portion.

1/Delta Time - Converts Delta Time reading to equivalent frequency.

Delta DC Volts - FUNCTION: Measures DC voltage level of marked waveform point in respect to ground using the PPV and DCV functions.
MARKER: Fully adjustable over entire range of waveform.

Digital Meter Tests - Ohms FUNCTION: Provides in- or out-of-circuit ohms. RANGES: 0.00 to 100 M Ohms.
ACCURACY: 0.2% ±2 digits.

Continuity Test - Provides audible tone of continuity.
RANGE: 0 to 199 Ohms. Audible tone turns on if resistance is <10 Ohms and turns off if resistance is >15 Ohms, ±2 Ohms.

DC Current - Provides measurement of DC current. RANGES: .001 to 1.99 amp
ACCURACY: 0.3% ±2 digits.

General - SIZE: 7.25" x 13.75" x 15" HWD (18.4 x 34.9 x 38.1 cm).
WEIGHT: 25 lbs (9.33 kg.).
POWER: 105 to 125 VAC, 50/60 Hz.