| Neon Sign Power Supply |
 |
POWER REQUIREMENTS
 Voltage : 120 VAC, 50/60 Hz- Current : 0.66 A max (depends on load)
- Power : 80 W max (depends on load)
INPUT CONNECTIONS
- Two AWG 18 leads, 8 inches long,
or power cord, 8 ft long, black or white
CONTROL (OPTIONAL)
- Red (+) and brown (-) wires can be connected to an electronic controller to modulate neon brightness or to gate the unit on and off
- Maximum "on" voltage : 1.20 V
- Minimum "off" voltage : 2.50 V
- Control current : 1.6 mA (5 V control voltage)
- Absolute max. control voltage : 15 V
OUTPUT CHARACTERISTICS
- Output is isolated from input for maximum flexibility of application. Shorted output supplies the rated current. Open circuit or excessive load will cause the unit to shut down, but special circuit will attempt to automatically restart power up to three times to avoid nuisance trips
- Voltage : 8KV AC max. (actual voltage
depends on load and will be
equal to or lower than this value.)
- Current : 20 mA
OUTPUT CONNECTIONS
- GTO-10 leads, 12 inches long
DIMENSIONS - 4.00 x 1.40 x 0.90 (max) inches
MOUNTING
- Unit is mounted with two 8-32 x 3/4 inch nylon screws and nuts (provided)
|
| Part
Number |
|
Price
per ea. |
| |
Neon Sign Power Supply |
|
|
