| NOTE: This Series Replaces The K7000 Series 13" and 19" Monitors |
SPECIFICATIONS
- CRT Size (Diagonal Measure): 13", 19"
- PHOSPHOR Type: P22
- CRT Etch: Polished Faceplate
- Striped Trio Spacing: 0.42mm & 0.63mm (13"), 0.71mm (19")
INPUT SIGNALS
- Input Connector: 0.156 Center Head
- Video Type: RGB Analog
- Video Input Impedence: 4.7K Ohm;
- Video Level: 1 to 5 Volts Peak-To-Peak
- Sync Type: TTL Sync; Separate Or Composite, Negative Or Positive
- Sync Input Impedence: 20K Ohm for Positive, 12K Ohm for Negative
- Horizontal Sync Frequency: 15.75 Khz
- Vertical Sync Frequency: 47 to 63 Hz
POWER INPUT
- Input Voltage: 90-264 VAC, 50-60 Hz; No Isolation Transformer Required
- Maximum Power: 70 Watts (19")
|
USER CONTROLS
- Remote Controls: Brightness, Contrast, Horizontal Centering, Vertical Size, Vertical Centering, Vertical Hold
- Internal Controls: Horizontal Hold, Horizontal Size, Focus
MISCELLANEOUS
- Operating Temperature: 0 to 55 Degrees C
- Agency Compliance: U.L., C.S.A., D.H.H.S. Radiation Performance Std.
RESOLUTION
- Graphic Modes: 640 x 200 (May Be Limited By The CRT)
- Video Bandwidth: 12 MHz Typical
|
