|
|
Chip Quik
Chip
Quik |
 |
 |
Chip Quik, The New, Patented
Smd Removal System
- By adding Chip Quik, normal
solder will reflow at a safe low temperature below 150
deg. C (300 deg. F).
- Remove QFPs, PLCCs, SOICs
and chip components without complex and costly equipment.
- A large inventory stock
of heater tips and nozzles are not required.
- LOW COST: Available in
complete kits for field service or industrial packaging
for rework departments. No shelf life! No investment
required. Use Chip Quik with existing rework equipment
or temperature controlled soldering irons.
|
BENEFITS FROM REDUCED SOLDER REFLOW TEMPERATURE:
REDUCE HEAT - REDUCE DAMAGE
ELIMINATE:
- Heat damaged pads, leads and circuitry
- Heat damaged solder joints of adjacent components
- Thermal blisters, burns and board delamination
- Mechanical damage from chip extraction when reflow is
incomplete
|
FURTHER
ELIMINATE REWORKING THE REWORK AND SAVE THE COST OF:
- Lost time
- Labor costs
- Inconvenience
- Lost boards from heat damage
It takes the technician 1 or 2 tries to perfect the process.
|
SMD 1 - CHIP QUIK SMD Removal
Kit
- Remove with solder iron or warm air bath.
SMD 1 Contents:
- 2.5 ft. CHIP QUIK material. Removes 8-10 SMD'S.
- 1 cc syringe of CHIP QUIK no clean rework paste flux.
- Alcohol pads for clean up.
- Complete instructions for SMD removal and cleanup
SMD 16 - CHIP QUIK Industrial
Pack 16 Ft.
- The same CHIP QUIK material in 30 convenient 6.5" lenghts.
- Instructions included.
SMD 32 - CHIP QUIK Industrial Pack 32 Ft.
- The same CHIP QUIK material in 60 convenient 6.5" lenghts.
- Instructions included.
SMD 291 - CHIP QUIK No Clean
Flux 10 cc syringe.
- The same flux used in the SMD 1. Ideal for all rework.
SMD 2000 - CHIP QUIK Complete Solder/Desolder rework kit.
- With easy to follow complete rework instructions
- Contents provided in a durable plastic case
- Recommended rework tools and materials, including:
Chip Quik Removal Alloy SMD 4.5 (4.5 ft.
removal alloy w/instructions)
Solder Paste - no clean 63/37 rework solder
paste w/flux in 1 cc syringe w/nozzle & cap.(trial size)
Solder 3 ft. 63/37 2% silver .031 in.
Chip Quik Paste flux - no clean flux in 1
cc syringe w/nozzle & cap.Used for solder/desolder.
Liquid flux remover/cleaner - 5 cc container
w/applicator. (non flammable)
Probe kit - 4 stainless steel dental picks
for SMD removal & placement.
Solder wick - no clean - 5 ft.
|
Handi Vac - SMD pick & place tool / w/tips
Acid brush - qty. 2.
Precision tweezers - for SMD removal &
placement.
Cleaning wipers - tight weave / low lint
4"x4" qty. 6(for cleaning PC board).
Swabs - double ended qty. 10.(for PC board
clean up)
Alcohol pads - qty. 6.(for PC board clean
up)
Chip Quik SMD removal & clean up instructions
|
| Part
Number |
Description |
Price
per ea. |
| |
Chip
Quik SMD Removal Kit |
|
| |
Chip
Quik Removal Alloy, 16 ft. |
|
| |
Chip
Quik Removal Alloy, 32 ft. |
|
| |
Chip
Quik No Clean Paste Flux |
|
| |
Chip
Quik Complete Solder/Desolder Kit |
|
|
|
